3 Tips To Prevent Water Intrusion in Your Home

exterior luxury home Modern Homes

As Tropical Storm Isaac dumps heavy rains across the Southeast, it’s testing the ability of many homes to withstand water intrusion. In the excitement of building a home, owners typically focus on the home’s finishes and sometimes neglect to ask about critical products that aren’t visible but work behind the scenes to protect the home. Waterproofing is one of THE MOST important considerations, especially if you live in climates with storm seasons such as Florida.

Here Are 3 Must-Dos to Waterproof Your Home:

Waterproof Exterior Balconies with Flashing & Proper Underlayment:

Balcony built with Flashing installed to prevent water intrusion, by Orlando custom builder Jorge Ulibarri, imyourbuilder.com

Flashing is the L-shaped sheet metal that goes from the balcony deck, up the walls and into the house underneath the door threshold to keep the rain out. Underneath the flashing is a membrane over the entire deck that seals the structure from water intrusion.

Drawing showing how flashing should be properly installed on points of entry to prevent water intrusion

It’s important that a certified company install the flashing according to the manufacturer’s specs and that the materials are top quality.

Build Roof Coverage on All Exterior Doors:

Roof coverage should extend 2-3 feet over all exterior door entryways to prevent water intrusion. All exterior doors should open to the outside. Front door on home designed and built by Orlando custom builder Jorge Ulibarri, imyourbuilder.com

Exterior doors on a home should always open to the outside and have roof coverage over the entry point, at least 2 to 3 feet extending out over the entry point to deflect water and prevent it from entering. In Florida, when it rains, strong winds tend to blow the rain horizontally, which literally pushes water into the home.  If the home’s exterior doors don’t have roof coverings, you can add awnings.

Install a Roof Membrane:

installation of roof membrane to prevent water intrusion

When going over the specs of the home, make sure your builder uses a self-adhesive membrane as underlayment under the roof tile.  This acts as a barrier to prevent water leaks.

For more tips on getting the best buy for your dollar with new home construction, subscribe to the series Trade Secrets by Jorge, available on YouTube

Share This Project

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

One Response

Leave a Reply

Your email address will not be published. Required fields are marked *